Let’s say your LG refrigerator displays an error code of 1F or IF. If that’s the case, there’s an issue with the ice maker that you’ll need to troubleshoot and fix. in this article, thedailysplash.tv will show you how to fix when LG Refrigerator Code ER IF.
The 1F or IF error number on an LG refrigerator indicates that the ice maker fan is malfunctioning. An ice accumulation at the fan or a failed ice maker fan motor will set this code. A fault with the door alignment or gasket can potentially cause the code to be triggered indirectly.
Continue reading to learn about the ways to troubleshoot this error number and what you can do to fix it.
What Does LG Refrigerator Code ER IF Mean?
You might assume you’re seeing 1F or IF on the LG fridge display because of the way error codes appear. But don’t worry: they all point to the same problem: the refrigerator has detected a fault with the ice maker compartment’s fan.
The ability of your refrigerator to cool items down will not be harmed as a result of this issue. Even so, it will hinder the ice maker from functioning properly. That’s why you’ll want to address this issue as soon as possible.
Causes And Solutions For LG Refrigerator Code ER IF
Ice and frost buildup at the ice maker fan, a misaligned door or door gasket, or a broken ice maker fan motor are the most common causes of this problem.
Let’s take a closer look at each scenario and how to address it.
At the fan, ice has formed.
What it is
Your LG fridge’s ice maker section has its own dedicated fan. This fan, like the others in the fridge, circulates cold air throughout the compartment to maintain a low temperature.
The container stays chilly enough to efficiently create ice for you to enjoy at any time while the fan is working properly.
The ice maker fan constantly blows cold air past its fan blades, which causes it to fail. However, if the air contains too much moisture, frost and ice will form surrounding the fan. Over time, the ice will build up to the point where it stops the fan blade from turning at all.
The fan will stop working as a result, and the 1F or IF fault code will appear on the fridge display.
How to fix
Defrost your ice maker fan thoroughly if there is a buildup. Depending on the size of the buildup, this operation could take up to 8 hours.
To do so, empty the ice bin and leave the refrigerator doors open. Then disconnect your refrigerator and leave it alone for at least 8 hours, or until the ice has melted.
Problem With The Door Or The Door Gasket
What it is
It’s also possible that the 1F or IF error code, as well as ice buildup at the ice maker fan, are both symptoms of a larger issue rather than the root cause. They could, for example, be signs of a problem with the fridge door or its gasket.
The doors of your LG refrigerator are made to close tightly and prevent cold air from exiting the compartments. Those doors, on the other hand, prevent warm air from seeping into the fridge and producing ice formation, as we explained in the last section.
The door gasket is crucial because it aids in the formation of a tight seal between the door and the remainder of the fridge’s body.
How it fails
Moisture and warm air entering the compartment cause ice buildup at the ice maker fan. This could happen if the fridge door has become misaligned as a result of damage. A bent door hinge, for example, could prevent the door from closing properly, allowing warm air to enter the compartment.
A foreign object can also hinder the door gasket from forming a tight seal between the fridge door and the body. Debris lodged in the door gasket, for example, could create a small opening that allows warm air to enter the refrigerator.
How to fix
Let’s say the refrigerator doors are misaligned. In that scenario, crank the adjustable nuts at the bottom hinge of the door to realign them. These nuts will allow you to raise or lower the door.
Inspect the entire length of your fridge door gaskets for strange things at the same time. Remove any debris you discover and clean the gasket.
Ice Maker Fan Motor Failed
What it is
The ice maker fan is driven by a separate motor that is linked to the blades of the fan. When the ice maker chamber gets too hot, the fan kicks on to distribute cold air and cool it down. The fan motor will turn off after the set temperature has been reached.
This on-and-off cycle will occur multiple times during the day to keep the ice maker cool without wasting energy.
The fan motor can burn out or have an electrical problem, which is how it fails. For example, if cold air leaks from the refrigerator, the fan will remain whirling for long periods of time to keep the temperature down. The motor will overheat and burn out as a result of this.
Aside from that, an electrical surge or short circuit in the fridge could harm the motor.
How to fix
You’ll have to replace the ice maker fan motor because it can’t be repaired. The ice maker fan housing is linked to the freezer’s back panel. Remove all of the products and shelves from the freezer to gain access to it.
Unthread the mounting screws and detach the panel from the tabs that hold it in place to remove the rear panel.
After you’ve removed the panel, unthread the screws that connect the fan motor to the panel’s housing. Removing the screws, disconnect the fan’s electrical wiring and remove the fan assembly.
After that, connect the wiring harness to the new fan and put it into the housing. Reinstall the rear panel into the freezer after screwing the motor into the housing.
Others problem codes of LG refrigerator and solution
ER 15, ER IS, or ER 1S are LG refrigerator trouble codes.
These error codes indicate a problem with the ice maker’s fan. If you see it on the screen, it’s possible that you have:
- Freezer fan that has been iced up;
- A faulty motor or a rusted-out fan
- The icemaker sensor is disconnected.
Your refrigerator most likely needs to be defrosted. Unplug it and wait a few hours for the ice to thaw. Then reconnect it and double-check your system. If the problem persists, seek the help of a skilled technician.
R DH is the LG refrigerator trouble code.
When there is a problem with the ice dispenser, this error code shows. In some circumstances, though, it is caused by a minor program fault that can be resolved by just resetting the device. Check the LCD display after unplugging your refrigerator for around 30 seconds. If it’s still there, the defrost mode isn’t reaching 46 degrees Fahrenheit.
You should examine the defrost mechanism. Remove all food from your refrigerator and unplug it. Remove the ice maker from the compartment’s upper back wall, detach the plastic guard, and inspect the wiring. Replace the guard and reconnect the refrigerator. If the wiring is in good shape, the issue could be with the defrost panel. The unit should be replaced. Call your nearest LG dealer and place an order for a new defroster if necessary.
Error code f dh on LG refrigerator
This error code indicates that the temperature in the defrost mode has not reached 40 degrees Fahrenheit. This could be caused by a blown fuse, a broken heater, or a malfunctioning control board. Check all of these components, especially the defrost heater, control board relay, and controller assembly, and replace them if necessary.
Error code 67 on LG refrigerators
This error code could have been caused by the door being left open or not closing properly. It also happens when a refrigerator is overflowing with food. Third, a door ajar alarm failure could be the cause. Make sure there’s no food in the way of it closing correctly to clear the problem. Reset your refrigerator if none of these problems are discovered. If the problem persists, it could be a problem with the alarm system. Examine the alarm system (wiring) and, if necessary, replace any faulty components.
LG refrigerators are unique and sophisticated devices that combine cutting-edge technology with a cost-effective and beautiful style. LG makes a variety of refrigerators, ranging from single and compact models to two-chamber, dimensional, and french door models. The trouble codes for LG refrigerators are listed below in a table.
H1 is the trouble code for LG refrigerators.
This error code indicates that the system is unable to effectively chill the freezer compartment and that there is insufficient cold. This could be as a result of:
- The freezer’s iced-up back wall
- Failure of the evaporator fan
- Low charge of refrigerant
Look at the back wall of the freezer compartment to see if it has too much frost. If this is the case, defrost your refrigerator.
Make sure the evaporator fan is working. Listen inside the freezer compartment: it must be running.
Ensure that the compressor is turned on.
If no problems have been discovered thus far, contact your local service and have your refrigerator inspected; you may need to recharge the refrigerant.
Er 1F or Er IF are the error codes for LG refrigerators.
This error number indicates that the ice maker blower fan is not operating, and hence no air is being pumped toward the ice maker. There could be an issue with the main control board, the ice blower fan, the ice maker motor, the wire harness, or any loose wiring. As a result, the ice machine stops producing ice, causing leaks.
The fan may stop working for a variety of reasons:
- Due to ice buildup and a fan blockage
- Fan with a flaw
- Disconnection or loose or damaged wiring
- Fan motor failure
- The main control board isn’t working properly.
As a result of the foregoing, your refrigerator may require a comprehensive inspection. Once you’ve figured out what’s causing the problem, look at the part to see if it needs to be repaired or replaced. Make use of the expertise of a seasoned technician.
ER FF is the LG refrigerator trouble code.
This error code comes when a freezer fan or freezer section doors are malfunctioning. It can happen as a result of a minor control board malfunction. A reset may be an option in this instance. Unplug the refrigerator for 20 minutes before plugging it back in.
You most likely have a problem with the freezer fan or freezer compartment. It could happen as a result of:
- Ice formation on and around the fan, preventing it from rotating properly;
- Rust from a broken fan;
- Due to faulty gaskets, the freezer door will not open or close properly.
Check for ice buildup on the fan. If required, defrost your refrigerator. Replace the faulty element of the fan and motor. Check to see if the freezer section is iced up (if it is, defrost your fridge) and that the doors open and close smoothly. Examine the gaskets. Repair or replace any faulty parts you locate.
ER RF is the LG refrigerator trouble code.
This error code indicates a problem with the fan motor or the main control board. This could be the result of a motor block caused by corrosion or ice buildup, a disconnection, unsecured wiring, or a malfunctioning control board.
Unplug your refrigerator for 10 minutes to clear the error code. Replace the plug. If the code persists, disconnect it once more and check:
- The refrigerator’s internal airflow
- Mode 1 of the test (press the button on the control board)
- The motor, fan, wiring, connectors, and control board are the elements stated above.
- Once you’ve discovered a faulty component, you can either fix or replace it. If none of your efforts have yielded results, call a refrigerator repair agency in your area.
thedailysplash.tv had explained about LG Refrigerator Code ER IF and how to fix this problem. Hope the guides can make your life become easier