How To Change Microwave Filter – Best 2022 Methods

How To Change Microwave Filter

Instead of venting air outside, over-the-range microwaves utilize charcoal filters to purify and recirculate it. Many over-the-range microwaves utilize grease filters as well, albeit models vary between 1- and 2-filter versions. Grease filters may and should be cleaned on a regular basis, while charcoal filters in recirculating microwaves are not reusable and should be replaced once or twice a year. In this article, will show you How To Change Microwave Filter

change microwave filter

What Is a Charcoal Microwave Filter?

In over-the-range microwaves that aren’t vented to the outside, there’s a microwave charcoal filter. While you’re cooking, the charcoal filter absorbs any unpleasant scents in the air. The majority of top-of-the-line machines include two filters: a charcoal filter and a grease filter. The charcoal filter is normally located behind a vent grill towards the top of the microwave, but check your owner’s handbook to be sure. The grease filter can be found beneath the microwave, facing the stovetop.

change microwave filter 1

When You  Should Change a Microwave Charcoal Filter?

Approximately every 6 months, replace your charcoal filter. Just by looking at a filter, you can tell if it needs to be replaced. Here are a few red flags:

Cooking oil looks to be clogging the filter.

When you’re cooking, you’ll notice odors that aren’t related to the food you’re making (this indicates that heavy grease from previous meals has built up).

If the filter’s surface appears shiny, there’s a lot of grease on it; the filter should ordinarily appear dull and porous.

For exact instructions on how to replace the charcoal filter and what size to buy, consult your microwave manual. The majority of microwaves require you to unplug them or switch off the power at the breaker. After that, take out the vent grill (this might be simply a push-button removal or unscrewing a couple of screws). Then remove the old filter and replace it with a new one.

How To Change Microwave Filter

change microwave filter 2

Every six months, your microwave’s charcoal filter should be replaced. The charcoal filter is normally found near the top of your over-the-range microwave for Whirlpool brand microwaves. Before you begin, double-check the position of the filter in your user guide or owner’s manual.

  • Above a functional stovetop is an over-the-range microwave.
  • Disconnect the electricity to your microwave or make sure it is switched off.
  • Find the screws that keep the top vent panel of your microwave in place.
  • Remove these screws with a Phillips head screwdriver and lay them aside in a secure location.
  • Remove the vent panel with care by tilting the top section down and gently lifting it away.
  • Locate the charcoal filter for your microwave. It’s normally near the middle, but double-check with your owner’s handbook to be sure.

Remove and properly dispose of the old charcoal microwave filter.

Remove the old charcoal filter and replace it with a new one. (Whirlpool® Microwave filter replacements are available directly from Make sure the filter is correctly positioned and secured before replacing it.

Replace the vent panel, then tighten the original screws in place.

How to clean a grease filter in a microwave

Grease filters are built into your microwave to help purify the air as you cook. These filters are reusable, however, they must be cleaned on a monthly basis to ensure that they operate at their best.

  • Look for the grease filter in the microwave. It should be above the stovetop, underneath your over-the-range microwave.
  • Take the filter out of its container. The filter should simply slide or pop out without the use of any equipment. Consult your owner’s handbook if you’re not sure how to remove the grease filter.
  • Fill a sink or basin with hot, soapy water and place the microwave grease filter in it. If your filter is particularly filthy, add roughly a quarter cup of baking soda.
  • Make sure the filter is submerged thoroughly. Allow for at least 10 minutes of soak time, or more if necessary.
  • After the microwave filter has soaked, clean it thoroughly with a dish brush or a household scrub brush. Apply mild pressure and avoid bending the filter or filter frame.
  • After you’ve finished cleaning the filter, give it a good rinse with hot water.
  • Allow your microwave filter to air dry or gently pat it dry with a soft, clean cloth.
  • You can slip or pop the filter back into place once it’s entirely dry.

What should consider when Change Microwave Filter

change microwave filter 3

Maintaining your over-the-range microwave will ensure that it runs smoothly for many years to come. Do you need to replace your present microwave or are you considering purchasing a new one? To select which size and style of microwave is appropriate for your house, use our microwave guide, and then browse our countertop models or full listing of microwaves. Consider installing a range hood in place of your over-the-range microwave.

Consider replacing your microwave with a range hood if you’re remodeling your kitchen. A range hood is far more long-lasting, strong, and appealing. If you get one from Proline, it will last you for many years. We have wall hoods, island hoods, inserts, under cabinet hoods, and much more. Get yours by clicking the button below.

Frequently Asked Questions

What Happens If My Microwave Grease Filter Isn’t Clean?

If you don’t clean your grease filter, you’ll likely end up with more grease marks on the walls around your stovetop, a less effective exhaust fan, and a sticky buildup on the grease filter that traps food and other grossness. But, in the end, that’s all there is to it.

What are the different types of microwave filters?

Microwave filters come in two varieties: charcoal filters and stainless steel or aluminum mesh filters. The steel and charcoal filters are sometimes used together, with the steel filter capturing the larger oil and dirt particles and the charcoal filter purifying the air even more before it is recirculated back into your kitchen.

Is there a filter in microwaves?

Filters are only found in microwaves that contain a fan that recirculates air back into your kitchen.

Is it possible to clean microwave filters?

Stainless steel or aluminum mesh filters can be washed. Every three months, these filters should be cleaned. If you cook frequently, check the filter every four to six weeks to ensure that your air is being properly cleansed.

In the microwave, there are charcoal filters. They don’t need to be cleaned; instead, they should be replaced every six months. Although six months may not be the optimal time for everyone, it is a good starting point. Be aware of your cooking habits and make adjustments as needed.

Here’s an example of what Amazon might have for you. However, the sort of filter you use depends depend on the brand of microwave you have.

What is the best way to clean my microwave?

You might want to clean your microwave as well if you’re cleaning your microwave filter. After all, that wouldn’t be a bad idea. It can be tough to establish a daily, or even weekly, cleaning program for your microwave. Tough oil and stains will inevitably accumulate; fortunately, you won’t have to fight them.

Allow the microwave to handle the heavy lifting. Simply microwave a bowl of vinegar or ammonia (1 cup) for three to four minutes. You can also use water to dilute the vinegar or ammonia. Use a stronger vinegar solution for tough stains; if you don’t need a deep clean, dilute the vinegar with water heavily. To get rid of the toughest stains, heat the vinegar for a longer time.

Is it necessary for me to clean my filters?

Yes, a clean filter indicates a working microwave that filters the air in your kitchen. With a dirty filter, on the other hand, you might as well not operate your fan at all because your kitchen air will not get clean.

Microwave mesh filters can be washed in the sink every few months, but charcoal filters aren’t supposed to be cleaned. This time frame may not be optimal for everyone, so make sure to check your microwave filters once a month.

Can I put my microwave filters in the dishwasher to clean them?

Check with your manufacturer or the instructions to see if your filters may be washed in the dishwasher. If you can’t discover this information, wash the filters by hand or in the dishwasher without detergent to be safe.

What does the microwave’s reset filter light mean?

To lower the panel door, open the microwave door and press the access panel above the cavity hole where it says “PUSH.” A Reset Filter notification light on the control panel on models with an Upfront Filter indicates when it’s time to alter the filter. Every six months, the Reset Filter reminder will illuminate.

Is there a reset button on a microwave?

To cancel anything on the display and reset the microwave, use the “Off/Clear” button. To reset any memory issues with the GE microwave, plug it back into the wall power supply. If you execute a hard reset, you will need to reset the time of day.

change microwave filter 4

What is the best way to clean the filter in my GE Profile microwave?

To clean the filters, soak them in hot water with detergent and swish them around. Allow the filter to completely dry before reinstalling it. Imbedded soil and dust can be removed with a light brushing. Use no ammonia or ammonia-based products. Cleaning the filter in the dishwasher is acceptable, although it may discolor the filter.

A microwave grease filter is designed to capture grease that shoots up from your stovetop. So if you have an over-the-stove microwave, you’ll only need a grease filter. Hope all the guides from can help you Change Microwave Filter successfully

Previous articleHow To Get Dish Soap Out Of Dishwasher – Step-by-step Guide
Next articleHow To Fix Hard Water In House – Best Solution


Please enter your comment!
Please enter your name here