Meandering Rivers are located on flat terrain thatreduces the flow speed ofwater, allowing the river to curve or “meander”. The bends in the river will migrate back and forth within the river valley. There is adifferentiation in flow speeds within a meandering river channel that produces areas of erosion and deposition. There are distinct sedimentary structures that result from this process.
You are watching: At a bend in a river, the main erosion is
Figure 1: Aerial photograph of ameandering river. The point bar, where sediment is deposited, can be seen in the inner bend of the river. There is a build up of gray colored sediment. The bank of the channel is where erosion occurs, and is located on the outer bend of the river. http://www.public-domain-image.com/full-image/nature-landscapes-public-domain-images-pictures/river-public-domain-images-pictures/meandering-river-aerial-photography.jpg.html
When the water moves around a curve, the velocity of the water is highest along the outer part of the channel. This area is referred to as the bank of the channel, and it is where erosion of sediment occurs. Erosion is caused by the increase in flow velocity, which has the force to erode and transportsediment from the bank. On the inside bend of the river, known as the point bar,water velocity is slower because it doesn”thave to travel as far as the water on the outside of the bend. This allows sediment to settle out and be deposited. As this cycle of erosion and deposition continues, the river will migrate in it”sriver valley. This migration can lead to the creation of an oxbow lake, which is described further here:https://thedailysplash.tv/Courses/University_of_California_Davis/UCD_GEL_109%3A_Sediments_and_Strata_(Sumner)/Textbook_Construction/Floodplains_and_Oxbow_Lakes.
Due to the higher velocity in the middle and outside bendof the river channel, coarser sediment will be deposited in those areas. The coarser grains will be transported to these parts of the river channel because thehigher velocity is able to transport the heaver grains. This is related to the concept of Reynolds Number,which measures whether sediment transport of a specificgrainsize will be able to occurbased on the velocity of the water.
There aretwo distinct areas within the river channel that are characterized by different flow speeds and grain size, the outer edge and the inner bend of the channel. The different flow speeds will carry different sized sediment grains, which willproduce a cross section that is asymmetrical. The coarser grains will be present in the outer edges of the channel, while finer sediment will be along the inside of the channel. The different flow speeds within the channel, along with the differentgrain sizes,will produce uniquesedimentary structures. The coarser grained areas that resultfrom a faster flow speed will have upper planar lamination or dune cross stratification. The point bar of the river will produce current ripple lamination, due to the finer sediment and slower flow speeds. As the river migrates towards the direction of the eroding bank, the current ripples of the point bar will end up being deposited on top of planar lamination/dune crossstratification of the bank.
Thetypical faciesthat occur within a meandering river environment include a scoured base of flow, which is caused by the high flow velocity inthe middle of the channel that is able to pick up and transport large sediment particles. There would also be a lag deposit of mud rip-up clasts and the coarsest sediment within the facies. A lag deposit is where physical processes remove the finer sediment, leaving behind the course grains.As we move upward in the stratigraphiccolumn, the grain size will become more fine. The structures you should find are trough cross stratification,rippled sands, and finally sigmoidalcross stratificationresulting from the point bar migration.
Periodically, the river will flood, causing its floodplain to fill with fine-grained sediment. This is due to the water flowvelocity decreasing as it flows away from the river channel. More information on floodplains can be found on the previously linked page on Oxbow Lakes and Floodplains. The floodplain facieswill be incorporatedinto the typical meandering river facies.
Figure 2: A typical stratigraphic column for a meandering river system with the lag deposits on the bottom, followed by trough cross stratification and ripple cross lamination. This is overlain by a typical floodplain facies that is composed of mud cracks and root traces in a fine grained sediment.https://thedailysplash.tv/at-a-bend-in-a-river-the-main-erosion-is/imager_2_5831_700.jpg
There are also key differences in the facies for a meandering river channel and a braided river channel. Braided river channels will have coarser grain sizes due to their faster flow speeds. Meanderingrivers carry lots of sediment within suspension that will be deposited in the structures associatedwith this environment, including point bars and oxbow lakes. Lastly, the migration of meandering rivers is more uniform in direction than a braided river because it will always migrate towards the eroding bank. A braided channel will migrate in many directions at the same time.